Workstations

ST-80 Ophthalmic Workstation
Takagi has long been working on the motorized "automatic sliding" mechanism. With a new feature that allows manual sliding being added, two mechanisms now coexist in the ST-80 / Height of the Center Console, Doctor's Desk, and the Side Table is adjustable / Elevation safety switch: Table and chair elevation stops if the patient's knee touches the underside of the table / Slide safety switch: The sliding action stops when the safety switch at the table end is pressed during automatic sliding / Wheelchair adaptable / Other manufacturer's slitlamps also installable / Elevation control of patient's chair is at hand / A wide variety of optional accessories available: The Lamp Arm and various other arms can be mounted on the Accessory Stand / The trial lenses can be stored in the drawer. Specifications Table Height: 670mm to 920mm Table slide stroke: 500mm Sliding speed: Variable between 3.8seconds and 5.4 seconds Allowable load: 30kgs Power supply to slitlamp: 6VAC, 7.5VAC, 9VAC, 12VAC30W, 12VAC50W Fixation lamp: 6VAC Power supply to indirect ophthalmoscope: 6VAC, 7.5VAC, 10VAC 12VAC/Power supply to direct ophthalmoscope: 2.5VAC, 3VAC, 3.5VAC, 4VAC, 6VAC Power supply: 230VAC Maximum power consumption: 1500VA Weight: 141kg (exclusive of optional accessories)

ST-40 Autodesk
Takagi has long been working on the motorized "automatic sliding" mechanism. With a new feature that allows manual sliding being added, two mechanisms now coexist in the ST-40 / Elevation safety switch: Table and chair elevation stops if the patient's knee touches the underside of the table / Slide safety switch: The sliding action stops when the safety switch at the table end is pressed during automatic sliding / Wheelchair adaptable / Other manufacturer's slitlamps also installable / Elevation control of patient's chair is at hand Specifications Table height: 670mm to 920mm Table slide stroke 500mm Sliding speed: Variable between 3.8 seconds and 5.4 second Allowable load 30kg Power supply to slitlamp 6VAC, 7.5VAC, 9VAC, 12VAC30W, 12VAC50W Fixation lamp 6VAC Power supply 230VAC Maximum power consumption 1500VA Weight 83kg

UN-21 Full Reclining Chair
In combination with an operating microscope, this chair can be used as an examination and treatment bed. (When an operating microscope is installed, an optional OM Arm is separately required). The AUTO-RETURN switch automatically returns the chair to its original position. A memory function allowing you to pre-select the reclining angle at any position you like is provided as standard(one memory). The standard foot switch controls elevation, tilt back/forward and stop of the chair. An optional arm-rest and I.V.pole can easily be installed. The chair upholstery made of high-grade material holds a patient comfortable. Specifications Elevation: By power hydraulic pump motor Elevation Stroke: 250mm Reclining: By power hydraulic pump motor Reclining Angle: 65° from upright position Headrest Tilt: 20° forward, 110° backward Headrest Vertical Movement: 120mm Allowable Load: Up to 150kgs Power Supply: 100v 120v and 230v AC;50 Power Consumption: 800VA Weight: 121kgs Upholster Colour: Gray Options: OM Arm (U21-02), Arm-rest (U20-20), I.V. pole (U19-02)

UN-15 Ophthalmic Chair
Pneumatic-assisted manual recline mechanism uses patient weight for effortless patient adjustments. Recline capability includes both a complately flat position and partial, seat back-only recline. A single-handed headrest is standard with UN-15, and our unique lock indicator assures that the headrest is firmly and securely in position. TAKAGI standard fail-safe hydraulic system provides smooth elevation with using a foot switch. Specifications Dimensions: 660mm(W) x 1120mm(D) x 1005mm(H) Seat width: 496mm Seat Height: 555mm to 805mm Reclining Angle: 107.5degree to 172.5degree Allowable load: 150kgs Weight: 110kgs

CR-650 & CR650S Electric Chair
By simple motor-drive mechanism, any position in up and downward movement can be adjusted and stopped at will / There are two rollers fitted at the rear of the base, allowing the chair to be easily moved back and forth by slightly lifting the front of the seat / Square seats with chair-back (standard) and round seats without chair-back (optional) are available / Choose your favorite color from the following three: grey, green, or purple / By fitting the slide mechanism (factory option), the chair can slide forward up to 60mm while the examinee is still seated / By connecting the CR-650S to ST-80, ST-40, ST-25C, the chair elevation can be controlled by the buttons on the instrument tables. Specifications Elevation stroke: 138.5mm Allowable load: up to 150kg Power consumption: 860VA Input power: 120VAC, 230VAC; 50/60HZ Weight: 22kg (CR-650), 21kg (CR-650S) Seat height: 120VAC 430mm -568.5mm (CR-650AL, CR-650SAL), 473mm - 613.5mm (CR-650AH, CR-650SAH), 30VAC 430mm -568.5mm (CR-650EL, CR-650SEL), 473mm - 613.5mm (CR-650EH, CR-650SEH)

[ B A C K ]